CX SERVER OPC OMRON MEGA.NZ
CX-OPC V1.22
PART1
PART2
PART3
PART4
CX-OPC V2.1
PART1
PART2
PART3
PART4
PART5
Omron CXOPCEV2
CX-Server OPC Software, Version 2, CD
Omron CX-server OPC software version 2.0 is compatible with
Windows vista business or enterprise edition/XP pro/XP embedded/2000, supports
1 user and comes in a CD
Features
Omron CX-server OPC software version 2.0 is compatible with
Windows vista business or enterprise edition/XP pro/XP embedded/2000, supports
1 user and comes in a CD
CX-Server OPC gives you total freedom in the selection of
visualization software, while ensuring total connectivity and interoperability
between devices, whatever the manufacturer, whatever the hardware, whatever the
software. The system comes complete with a set of graphical ActiveX controls to
make it easy to work intuitively in Excel or Visual Basic: a toolbar is added
to Microsoft Excel so that these components can be simply dragged into a work
sheet. Yet for all this simplicity, CX-Server OPC has the sophistication to
allow the design of systems to control everything from a device to a complete
manufacturing plant.
Machine-data
visualization software
Easy connectivity
with CX-Server OPC
Supports all Omron
Networks
Communicates to
CS/CJ/C/CV and CP family PLCs, Trajexia, Celciux and ZX Sensors
Supports all Omron
communication protocols
Compatible with
OPC Data Access 1.0a and 2.05 SCADA clients
System requirement
600 MHz Intel or compatible processor, 256 Mbytes RAM, 100 Mbytes of available
hard disk space, 1024 X 768 XGA display
CX-OPC V2.60
PART1
PART2
PART3
PART4
PART5
PART6
PART7
PART8
PART9
http://maetrimal.com/4U7E
CX-OPC V3.0 TRIAL INGEAR
Ready to evaluate Omron OPC server? Fill out the form below
to get a free trial download. OPC Server for OMRON C Series, CV Series, C200 /
C200H, CS1, CJ1, CPM2 and CQM1 programmable logic controllers.
Your free, 10-day trial download includes:
All Omron OPC
editions
VB.NET and C#
example solutions (with full source code and ready to run examples)
Help files (local
and web)
Help desk support
Software updates
(when available)
.
SUPPORTED CONTROLLERS
Ethernet and
serial
CJ Series/CM
Series/CQ Series
C200/CM Series/C
Series
Wonderware,
rsview, Iconics and more
Minimum Hardware Requirements
REQUIREMENTS
Windows 10
Windows 8
Windows 7
Windows Vista
Windows XP
Windows Server
KEY FEATURES
Built from the ground up for OPC
Data Monitor and
Simulation functions reduce development time
Multiple
communication interfaces supported in a single server
Does not rely on
middle-ware drivers
Hostlink Serial to
Omron PLC’s, FINS Ethernet to Omron PLC’s, FINS Serial to Omron PLC’s
Supports CIO, IR,
LR, HR, AR, DM, TC, TIM, CNT, ES and WR registers
Bit, Byte, 4-digit
BCD, 16-bit integer, 8-digit BCD, 32-bit integer, 32-Bit IEEE floating point
and strin
data types
Use any mix and
any number of communication interfaces concurrently
32-Bit
multi-threaded driver operation for fast throughput
Optimized Block
Read/Write Operations
Supports a wide
range of OPC Clients
Microsoft Windows
XP Professional
Microsoft Windows
2000 Professional
Microsoft Windows NT 4.0 Service Pack 3 or later is highly recommended
CX-OPC USER MANUAL
GUIDE DEVELOPING OPC
DATASHEET OPC V2.0
CX SERVER LITE OPC BROCHURE
MEGA REGISTER Create an account :
Connection To OPC Clients Using CX
Server OPC
Introduction
This tutorial is intended to provide an overview of connecting
CelciuXº to the PC and connecting to an OPC client.
Components used:
• EJ1N-TC__-__
• EJ1C-EDU_-NFLK
• 24 Volt Supply
• E58-CIFQ1
• CX Server OPC / EJ1N Device Driver
|
|
Procedure:
- Connect
the CelciuXº using the procedure described in “Connection to CX-Thermo via
USB port”.
- Install
CX-Server OPC and EJ1N driver
- Start
CX-Server OPC and define the CX-Server project file. Edit the project to
add an EJ1N device and add the required points. For definition of point
addressing, see the help file under “Start | Programs | Omron | CX-Server
| Drivers | EJ1 Driver help”
- Start
the OPC Client and connect to the “Omron.OpenDataServer”.
For example, if using the Omron OPC Client:
connect and assign the parameter mapping
Write the Excel / VB / VBA application
To read / write or send Operation Commands for example:
Cells(2, 1) = OPCComms1.Read("PVSP", "TC-2\PV2_1",
ReadFromCache)
OPCComms1.Write "PVSP", "TC-2\SP2_1", Cells(2, 3),
WaitUntilComplete
OPCComms1.Write "Commands", "TC-2\RunALL", 1,
WaitUntilComplete
(The group “PVSP” contains the PV and SP parameters and
group “Commands” contains the operation command related parameters)
You can now Read and Write parameters of the connected
CelciuX temperature controller.
You can also use PortB on the EDU to connect,
using an RS232/485 converter, to the PC
