CX SERVER OPC OMRON MEGA.NZ


CX SERVER OPC OMRON MEGA.NZ

CX-OPC V1.22
PART1
PART2
PART3
PART4

CX-OPC V2.1
PART1
PART2
PART3
PART4
PART5

Omron CXOPCEV2 CX-Server OPC Software, Version 2, CD
Omron CX-server OPC software version 2.0 is compatible with Windows vista business or enterprise edition/XP pro/XP embedded/2000, supports 1 user and comes in a CD


 


Features
Omron CX-server OPC software version 2.0 is compatible with Windows vista business or enterprise edition/XP pro/XP embedded/2000, supports 1 user and comes in a CD

CX-Server OPC gives you total freedom in the selection of visualization software, while ensuring total connectivity and interoperability between devices, whatever the manufacturer, whatever the hardware, whatever the software. The system comes complete with a set of graphical ActiveX controls to make it easy to work intuitively in Excel or Visual Basic: a toolbar is added to Microsoft Excel so that these components can be simply dragged into a work sheet. Yet for all this simplicity, CX-Server OPC has the sophistication to allow the design of systems to control everything from a device to a complete manufacturing plant.

    Machine-data visualization software
    Easy connectivity with CX-Server OPC
    Supports all Omron Networks
    Communicates to CS/CJ/C/CV and CP family PLCs, Trajexia, Celciux and ZX Sensors
    Supports all Omron communication protocols
    Compatible with OPC Data Access 1.0a and 2.05 SCADA clients
    System requirement 600 MHz Intel or compatible processor, 256 Mbytes RAM, 100 Mbytes of      available hard disk space, 1024 X 768 XGA display


CX-OPC V2.60
PART1
PART2
PART3
PART4
PART5
PART6
PART7
PART8
PART9
http://maetrimal.com/4U7E



CX-OPC V3.0 TRIAL INGEAR


Ready to evaluate Omron OPC server? Fill out the form below to get a free trial download. OPC Server for OMRON C Series, CV Series, C200 / C200H, CS1, CJ1, CPM2 and CQM1 programmable logic controllers.
Your free, 10-day trial download includes:
    All Omron OPC editions
    VB.NET and C# example solutions (with full source code and ready to run examples)
    Help files (local and web)
    Help desk support
    Software updates (when available)
.

SUPPORTED CONTROLLERS
    Ethernet and serial
    CJ Series/CM Series/CQ Series
    C200/CM Series/C Series
    Wonderware, rsview, Iconics and more
Minimum Hardware Requirements
REQUIREMENTS
    Windows 10
    Windows 8
    Windows 7
    Windows Vista
    Windows XP
    Windows Server
KEY FEATURES
    Built from the ground up for OPC
    Data Monitor and Simulation functions reduce development time
    Multiple communication interfaces supported in a single server
    Does not rely on middle-ware drivers
    Hostlink Serial to Omron PLC’s, FINS Ethernet to Omron PLC’s, FINS Serial to Omron PLC’s
    Supports CIO, IR, LR, HR, AR, DM, TC, TIM, CNT, ES and WR registers
    Bit, Byte, 4-digit BCD, 16-bit integer, 8-digit BCD, 32-bit integer, 32-Bit IEEE floating point and strin
data types
    Use any mix and any number of communication interfaces concurrently
    32-Bit multi-threaded driver operation for fast throughput
    Optimized Block Read/Write Operations
    Supports a wide range of OPC Clients
    Microsoft Windows XP Professional
    Microsoft Windows 2000 Professional
    Microsoft Windows NT 4.0 Service Pack 3 or later is highly recommended




CX-OPC USER MANUAL
GUIDE DEVELOPING OPC
DATASHEET OPC V2.0
CX SERVER LITE OPC BROCHURE

 




 



MEGA REGISTER   Create an account     :



 





Connection To OPC Clients Using CX Server OPC
Introduction
This tutorial is intended to provide an overview of connecting CelciuXº to the PC and connecting to an OPC client.
Components used:
• EJ1N-TC__-__
• EJ1C-EDU_-NFLK
• 24 Volt Supply
• E58-CIFQ1
• CX Server OPC / EJ1N Device Driver
Procedure:
  • Connect the CelciuXº using the procedure described in “Connection to CX-Thermo via USB port”.
  • Install CX-Server OPC and EJ1N driver
  • Start CX-Server OPC and define the CX-Server project file. Edit the project to add an EJ1N device and add the required points. For definition of point addressing, see the help file under “Start | Programs | Omron | CX-Server | Drivers | EJ1 Driver help”
  • Start the OPC Client and connect to the “Omron.OpenDataServer”.

    For example, if using the Omron OPC Client:
     



connect and assign the parameter mapping

 

Write the Excel / VB / VBA application
To read / write or send Operation Commands for example:
Cells(2, 1) = OPCComms1.Read("PVSP", "TC-2\PV2_1", ReadFromCache)
OPCComms1.Write "PVSP", "TC-2\SP2_1", Cells(2, 3), WaitUntilComplete
OPCComms1.Write "Commands", "TC-2\RunALL", 1, WaitUntilComplete
(The group “PVSP” contains the PV and SP parameters and group “Commands” contains the operation command related parameters)
You can now Read and Write parameters of the connected CelciuX temperature controller.
You can also use PortB on the EDU to connect, using an RS232/485 converter, to the PC

Author

Written by Admin

Aliquam molestie ligula vitae nunc lobortis dictum varius tellus porttitor. Suspendisse vehicula diam a ligula malesuada a pellentesque turpis facilisis. Vestibulum a urna elit. Nulla bibendum dolor suscipit tortor euismod eu laoreet odio facilisis.

0 komentar: